A high solids epoxy primer for steel and concrete. Designed to prevent abrasive blasted steel from developing rust bloom prior to the application of a coating or lining system.
Technical Data Sheet | Safety Data Sheet [Comp A] | Safety Data Sheet [Comp B]
Features:
- Meets most VOC Requirements
- Low Odor
- User Friendly
- Tolerant to moisture vapor transmission (<5 lbs per 1000 ft²)
Color:
- Clear
Dry Film Thickness:
- 3 – 4 mils (76 – 102 microns) per coat
Typical Uses:
- Primer for epoxy and urethane systems
Solids Content:
- By Volume: 85%
Theoretical Coverage Rate:
- 1363 ft²/gal at 1.0 mils (33.5 m²/l at 25 microns)
- 454 ft²/gal at 3.0 mils (11.2 m²/l at 75 microns)
- 341 ft²/gal at 4.0 mils (8.4 m²/l at 100 microns)
- Allow for loss in mixing and application.
VOC Values:
- As Supplied: 120 g/L
Topcoats:
- Topcoat selection will depend on exposure
- Contact Dudick for recommendations.
Application:
- For maximum performance, all steel surfaces should be primed. Contact a Dudick representative for system recommendations.
- Concrete, however, must always be primed to aid in the “wetting out” required for good adhesion.